It is common for people to surmise that performing a jump start on your battery in the rain could be dangerous. Fortunately, there are no added risks to jumping the batter in the rain. Keep in mind however, that jumpstarting a vehicle does have it dangers, making it best done by roadside assistance expert. If you have no knowledge of a battery jump, you should avoid jumping your vehicle on your own. Though it can expose your battery to water droplets that can reduce the life of the battery, battery jumpstarts in the rain are not exactly dangerous. Today, we at Top Notch Mobile Tire Service would like to further discuss batter jumpstarts and the rain.
Is Jump Starting a Car in the Rain Dangerous?
Most people know water is a good conductor of electricity. This fact makes people wonder about the safety, regardless jumping a vehicle in the rain is perfectly safe as long as you follow these basic rules. Make sure that the jumper cables are in good condition before you attempt. The insulation may be damaged if they are old. Especially if water finds its way into the cable, this could cause a short circuit. It’s better to protect yourself and the battery from the rain whenever possible. For jumpstarting a vehicle, you need to take all the necessary usual precautions. Don’t touch the battery terminals and connect the wires in the right order and if possible, wear gloves.
How to Jumpstart a Car in the Rain
Before starting it, switch off all the electrical systems of your car like the radio, lights and air conditioning. You want all the energy to go into the flat battery.
-Make sure the other vehicle is parked close to the dead car. This allows the jumper cables to comfortably reach the terminals. To ensure that they don’t touch each other and cause damage, maintain a safe distance between the two vehicles as well.
– If possible, use a water-resistant material that can protect and cover the battery from moisture and rain after you open the hood.
– Turn off both engines and make sure that the ignition keys are removed.
– To the positive terminal of the dead battery, attach one red end of the jumper cable and the positive terminal of the working battery, attach the other red end.
– To the negative terminal of the dead battery, attach the black end of the jumper cable and on the negative terminal of the healthy battery, attach the black end of the cable.
– In order to provide electricity to the dead car, start the donor vehicle now. Then start the car with the weak battery. Leave it for at least 30 minutes to recharge the flat battery after it starts.
– If the battery does not start, you need a professional for roadside assistance.
Can You Damage Your Car By Giving it a Jump Start?
If you don’t have any know-how or experience, jumpstarting can be risky. Starting a fire or burn the entire electrical system of the car with a faulty battery. Since jumper cables often create sparks and if not done correctly can result in a fire or even an explosion. Ultimately, jumpstarting improperly or making a mistake can cause severe damage to either vehicle and/or bodily harm.
Tire Services in Dallas, Texas (Just Minutes Away from Addison, Balch Springs, Carrollton, Cedar Hill, Coppell, DeSoto, Duncanville, Farmers Branch, Ferris, Garland, Grand Prairie, Grapevine, Irving, Lancaster, Lewisville, Mesquite, Ovilla, Richardson, Rowlett, Sachse, Seagoville, Sunnyvale & Wylie, TX)
When you need a jumpstart or other roadside assistance services, call in the experts of Top Notch Mobile Tire Service to assist you!
